Showing posts with label 2. Heat Pumps and Air Conditioning. Show all posts
Showing posts with label 2. Heat Pumps and Air Conditioning. Show all posts

Heat Pump and Air Conditioning Page

Here are links to all the articles below!

The Mighty Heat Pump: Commentary

The Mighty Heat Pump

Heat Pump Demo

Interpreting the Decibel Ratings of the Unit

Ozone Concerns

Q & A on Ozone Depletion

Heat Pump and Air Conditioning Terms and Definitions

*For all of you who are searching the internet to find how many square feet a certian protable air conditioner will cool with "X" BTUs, a generous rule of thumb is 25 BTUs per square foot. However, if this is an A/V Room or Server Room, you should get a professional involved. - Wes

The Mighty Heat Pump: Commentary

Before we get into the nitty gritty of how they work, I want to tell you a few things you may not hear from another heating contractor.

First - It does not matter which heat pump you buy, it will save you a ton of money! Whether it is Carrier,
Coleman Lennox, Trane, American Standard or York; I will guarantee that you will be extremely happy with how much you save!

Second - While any heat pump will save you money, the value for your dollar will depend on a wide variety of variables. Sound Levels, Efficiencies, Aesthetics, Refrigerants, Zoning, Secondary Fuel Source (NG or LP?) to name a few. All of these determine what value you are getting for your dollar. I could sell you the quietest, most efficient, best looking heat pump, but if you don't have any close neighbors and it will be behind your garage, then that is a bit of a swindle.

Third - The most critical variable is installation. Period. Any heat pump can lose its value quickly if the installation is flawed. There is a lot of steps in the heat pump installation equation; if any are missed or incorrectly performed the promised efficiency and benefits start to erode rapidly. There are many customers that trust me and Barron Heating, but if you have to shop around, please check references and do your homework.

Again, it does not matter if you are looking at a Carrier, Coleman, Trane or Lennox; if the Efficiency, Sound and Aesthetics are all comparable, it won't be the heat pump that matters* but the contractor you choose to put it in! I do have those whose work I respect among the competition, but point is; don't shop on price alone. There are 41 heating contractors in the phone book and I can count on one hand how many I would get bids from if I was a consumer.

*Carrier Infinity System is the only exception to this rule.
Why? There is nothing like it.


Last - I cannot end without telling you why Barron leads the pack. Mostly? It's a group of people that are passionate every day to serve you better. If a problem does come up, our team of professionals are committed to meet and exceed your expectations 100% of the time. The end result matters deeply to us and the most important thing at the end of the day is your satisfaction.

It is the same reason that every single customer review I have received has EXCELLENT checked in every category which includes:

Salesman - Scheduled appointment were kept, was friendly and courteous, demonstrated good product knowledge, listened well and offered solutions and submitted prompt proposal.

Installers - I was kept advised of job schedule, installer arrived as scheduled, my questions and concerns were promptly addressed, work was completed in a professional manner, clean-up was satisfactorily performed and system operation was satisfactorily explained.

It is things like these and others; such as we now offer the First Year Service FREE on all selected HVAC equipment we install, that make us a high value contractor. You will always be able to find a lower price, but if it's value for your dollar you want, with the best return on investment, I guarantee it won't get any better than Barron.

-Wes

The Mighty Heat Pump

There are few things that excite me more than the Heat Pump. Okay, I can think of a few, but for climates with moderate heating and cooling needs, heat pumps offer an excellent energy-efficient alternative to furnaces and air conditioners. Like your refrigerator, heat pumps use electricity to move heat from a cool space into a warm, making the cool space cooler and the warm space warmer. During the heating season, heat pumps move heat from the cool outdoors into your warm house; during the cooling season, heat pumps move heat from your cool house into the warm outdoors. Because they move heat rather than generate heat, heat pumps can provide up to 4 times the amount of energy they consume.

The most common type of heat pump is the air-source heat pump, which transfers heat between your house and the outside air. If you heat with electricity, a heat pump can trim the amount of electricity you use for heating by as much as 40%–60%. High-efficiency heat pumps also dehumidify better than standard central air conditioners, resulting in less energy usage and more cooling comfort in summer months. The efficiency of most air-source heat pumps as a heat source drops dramatically at temperatures below freezing, but Hybrid Heat, using a gas furnace back-up can overcome that problem.

For homes without ducts, air-source heat pumps are also available in a ductless version called a mini-split heat pump. Be looking for more on this later!

Higher efficiencies are achieved with geothermal (ground-source or water-source) heat pumps, which transfer heat between your house and the ground or a nearby water source. Although they cost more to install, geothermal heat pumps have low operating costs because they take advantage of relatively constant ground or water temperatures. However, the installation depends on the size of your lot, the subsoil and landscape. Ground-source or water-source heat pumps can be used in more extreme climatic conditions than air-source heat pumps, and customer satisfaction with the systems is very high.

How Heat Pumps Work (click house to go to demo)


Patience. This may take a few minutes to load.

If it does not load, you may need to disable your browsers' Ad-blocker.

*requires Adobe Flash Player, click here to install


A heat pump's refrigeration system consists of a compressor and two coils made of copper tubing (one indoors and one outside), which are surrounded by aluminum fins to aid heat transfer. In the heating mode, liquid refrigerant extracts heat from the outside coils and air, and moves it inside as it evaporates into a gas. The indoor coils transfer heat from the refrigerant as it condenses back into a liquid. A reversing valve, near the compressor, can change the direction of the refrigerant flow for cooling as well as for defrosting the outdoor coils in winter.

When outdoor temperatures fall below 35-40°F, your electric or gas furnace kicks in to provide indoor heating. A Heat Pump paired with a gas furnace is commonly know as Hybrid Heat and can allow a system to operate more efficiently.

In heating mode, an air-source heat pump evaporates a refrigerant in the outdoor coil; as the liquid evaporates it pulls heat from the outside air. After the gas is compressed, it passes into the indoor coil and condenses, releasing heat to the inside of the house. The pressure changes caused by the compressor and the expansion valve allow the gas to evaporate at a low temperature outside and condense at a higher temperature indoors.

Most central heat pumps are split-systems—that is, they each have one coil indoors and one outdoors. Supply and return ducts connect to a central fan, which is located indoors.

Selecting A Heat Pump

Every residential heat pump sold in this country has an EnergyGuide Label, which features the heat pump's heating and cooling efficiency performance rating, comparing it to other available makes and models.

Heating efficiency for air-source electric heat pumps is indicated by the heating season performance factor (HSPF), which is the ratio of the seasonal heating output in Btu divided by the seasonal power consumption in watts. Cooling efficiency is indicated by the seasonal energy efficiency ratio (SEER), which is the ratio of the seasonal heat removed in Btu per hour to the seasonal power consumption in watts.

The Heating Seasonal Performance Factor (HSPF) rates both the efficiency of the compressor and the electric-resistance elements. The most efficient heat pumps have an HSPF of between 8 and 10.

The Seasonal Energy Efficiency Ratio (SEER) rates a heat pump's cooling efficiency. In general, the higher the SEER, the higher the cost. However, the energy savings can return the higher initial investment several times during the heat pump's life. Replacing a 1970s vintage, central heat pump (SEER = 6) with a new unit (SEER=13) will allow the use of half the energy to provide the same amount of cooling, cutting air-conditioning costs in half. The most efficient heat pumps have SEERs of between 13 and 19.

To choose an air-source electric heat pump, look for the ENERGY STAR label, which is awarded to those units with SEERs of 12 or greater and HSPFs of 8.2 or greater. If you are purchasing an electric air-source heat pump and are uncertain whether it meets ENERGY STAR qualifications, look on the bright yellow EnergyGuide label for an efficiency of 12 SEER/8.2 HSPF or greater.

In September 2006, the U.S. Department of Energy began enforcing a new standard that will require central heat pumps to have a minimum rating of 7.7 HSPF. In warmer climates, SEER is more important than HSPF; in colder climates, focus on getting the highest HSPF feasible!

Questions? Call the Green Team @ 360-410-9057

Interpreting the Decibel Ratings of a Unit

This decibel (dBA) table compares some common sounds and shows how they rank in potential harm to hearing. In many industries, workers are exposed to dangerous noise levels. This is particularly true in the construction, lumber, mining, steel and textile industries.

SOUND

NOISE LEVEL (dBA)

EFFECT

Jet Engines (Near)

140


Shotgun Firing

130


Jet Takeoff (100-200 Ft.)

130


Rock Concert (Varies)

110-140

Threshold of pain
(125 dB)
Oxygen Torch

121


Discotheque/Boom Box

120

Threshold of sensation (120 dB)

Thunderclap (Near)

120


Stereo (Over 100 Watts)

110-125


Symphony Orchestra

110

Regular exposure of more than 1 minute risks permanent hearing loss (over 100 dB)

Power Saw (Chain Saw)

110

Jackhammer

110

Snowmobile

105


Jet Fly-over (1000 Ft.)

103


Electric Furnace Area

100

No more than 15 minutes of unprotected exposure recommended (90-100 dB)

Garbage Truck/Cement Mixer

100

Farm Tractor

98

Newspaper Press

97


Subway, Motorcycle (25 Ft)

88

Very annoying

Lawnmower, Food Blender

85-90

Level at which hearing damage (8 hrs.) begins (85dB)

Recreational Vehicles, TV

70-90


Diesel Truck (40 Mph, 50 Ft.)

84


Average City Traffic Noise

80

Annoying; interferes with conversation; constant exposure may cause damage

Garbage Disposal

80

Washing Machine

78


Dishwasher

75


Vacuum Cleaner

70

Intrusive; interferes with telephone conversation

Hair Dryer

70

Normal Conversation

50-65


Quiet Office

50-60

Comfortable
(under 60 dB)
Refrigerator Humming

40


Whisper

30

Very quiet

Broadcasting Studio

30


Rustling Leaves

20

Just audible

Normal Breathing

10



0

Threshold of normal hearing (1000-4000 Hz)


Since the sensitivity of the ear to sound is not the same for all frequencies, weighting or attenuating filters are included in the sound level meter's circuits to simulate the ears' response. A noise level meter gives an instantaneous measurement of the noise present, but cannot measure the duration of the exposure.

Ozone Concerns

The Ozone Layer

The Earth's atmosphere is divided into several layers. The lowest region, the troposphere, extends from the Earth's surface up to about 10 kilometers (km) in altitude. Virtually all human activities occur in the troposphere. Mt. Everest, the tallest mountain on the planet, is only about 9 km high. The next layer, the stratosphere, continues from 10 km to about 50 km. Most commercial airline traffic occurs in the lower part of the stratosphere.

Most atmospheric ozone is concentrated in a layer in the, stratosphere about 15-30 kilometers above the Earth's surface. Ozone is a molecule containing three oxygen atoms. It is blue in color and has a strong odor. Normal oxygen, which we breathe, has two oxygen atoms and is colorless and odorless. Ozone is much less common than normal oxygen. Out of each 10 million air molecules, about 2 million are normal oxygen, but only 3 are ozone.

However, even the small amount of ozone plays a key role in the atmosphere. The ozone layer absorbs a portion of the radiation from the sun, preventing it from reaching the planet's surface. Most importantly, it absorbs the portion of ultraviolet light called UVB. UVB has been linked to many harmful effects, including various types of skin cancer, cataracts, and harm to some crops, certain materials, and some forms of marine life.

At any given time, ozone molecules are constantly formed and destroyed in the stratosphere. The total amount, however, remains relatively stable. The concentration of the ozone layer can be thought of as a stream's depth at a particular location. Although water is constantly flowing in and out, the depth remains constant.

While ozone concentrations vary naturally with sunspots, the seasons, and latitude, these processes are well understood and predictable. Scientists have established records spanning several decades that detail normal ozone levels during these natural cycles. Each natural reduction in ozone levels has been followed by a recovery. Recently, however, convincing scientific evidence has shown that the ozone shield is being depleted well beyond changes due to natural processes.

Ozone Depletion

For over 50 years, chlorofluorocarbons (CFCs) were thought of as miracle substances. They are stable, nonflammable, low in toxicity, and inexpensive to produce. Over time, CFCs found uses as refrigerants, solvents, foam blowing agents, and in other smaller applications. Other chlorine-containing compounds include methyl chloroform, a solvent, and carbon tetrachloride, an industrial chemical. Halons, extremely effective fire extinguishing agents, and methyl bromide, an effective produce and soil fumigant, contain bromine. All of these compounds have atmospheric lifetimes long enough to allow them to be transported by winds into the stratosphere. Because they release chlorine or bromine when they break down, they damage the protective ozone layer. The discussion of the ozone depletion process below focuses on CFCs, but the basic concepts apply to all of the ozone-depleting substances (ODS).

In the early 1970s, researchers began to investigate the effects of various chemicals on the ozone layer, particularly CFCs, which contain chlorine. They also examined the potential impacts of other chlorine sources. Chlorine from swimming pools, industrial plants, sea salt, and volcanoes does not reach the stratosphere. Chlorine compounds from these sources readily combine with water and repeated measurements show that they rain out of the troposphere very quickly. In contrast, CFCs are very stable and do not dissolve in rain. Thus, there are no natural processes that remove the CFCs from the lower atmosphere. Over time, winds drive the CFCs into the stratosphere.

The CFCs are so stable that only exposure to strong UV radiation breaks them down. When that happens, the CFC molecule releases atomic chlorine. One chlorine atom can destroy over 100,000 ozone molecules. The net effect is to destroy ozone faster than it is naturally created. To return to the analogy comparing ozone levels to a stream's depth, CFCs act as a siphon, removing water faster than normal and reducing the depth of the stream.

Large fires and certain types of marine life produce one stable form of chlorine that does reach the stratosphere. However, numerous experiments have shown that CFCs and other widely-used chemicals produce roughly 85% of the chlorine in the stratosphere, while natural sources contribute only 15%.

Large volcanic eruptions can have an indirect effect on ozone levels. Although Mt. Pinatubo's 1991 eruption did not increase stratospheric chlorine concentrations, it did produce large amounts of tiny particles called aerolsols (different from consumer products also known as aerosols). These aerosols increase chlorine's effectiveness at destroying ozone. The aerosols only increased depletion because of the presence of CFC- based chlorine. In effect, the aerosols increased the efficiency of the CFC siphon, lowering ozone levels even more than would have otherwise occurred. Unlike long-term ozone depletion, however, this effect is short-lived. The aerosols from Mt. Pinatubo have already disappeared, but satellite, ground-based, and balloon data still show ozone depletion occurring closer to the historic trend.

One example of ozone depletion is the annual ozone "hole" over Antarcticathat has occurred during the Antarctic Spring since the early 1980s. Rather than being a literal hole through the layer, the ozone hole is a large area of the stratosphere with extremely low amounts of ozone. Ozone levels fall by over 60% during the worst years.

In addition, research has shown that ozone depletion occurs over the latitudes that include North America, Europe, Asia, and much of Africa, Australia, and South America. Over the U.S., ozone levels have fallen 5-10%, depending on the season. Thus, ozone depletion is a global issue and not just a problem at the South Pole.

Reductions in ozone levels will lead to higher levels of UVB reaching the Earth's surface. The sun's output of UVB does not change; rather, less ozone means less protection, and hence more UVB reaches the Earth. Studies have shown that in the Antarctic, the amount of UVB measured at the surface can double during the annual ozone hole. Another study confirmed the relationship between reduced ozone and increased UVB levels in Canada during the past several years.

Laboratory and epidemiological studies demonstrate that UVB causes non-melanoma skin cancer and plays a major role in malignant melanoma development. In addition, UVB has been linked to cataracts. All sunlight contains some UVB, even with normal ozone levels. It is always important to limit exposure to the sun. However, ozone depletion will increase the amount of UVB, which will then increase the risk of health effects. Furthermore, UVB harms some crops, plastics and other materials, and certain types of marine life.

The World's Reaction

The initial concern about the ozone layer in the 1970's led to a ban on the use of CFCs as aerosol propellants in several countries, including the U.S. However, production of CFCs and other ozone-depleting substances grew rapidly afterward as new uses were discovered.

Through the 1980s, other uses expanded and the world's nations became increasingly concerned that these chemicals would further harm the ozone layer. In 1985, the Vienna Convention was adopted to formalize international cooperation on this issue. Additional efforts resulted in the signing of the Montreal Protocol in 1987. The original protocol would have reduced the production of CFCs by half by 1998.

After the original Protocol was signed, new measurements showed worse damage to the ozone layer than was originally expected. In 1992, reacting to the latest scientific assessment of ozone layer, the Parties decided to completely end production of halons by the beginning of 1994 and of CFCs by the beginning of 1996 in developed countries.

Because of measures taken under the Protocol, emissions of ozone-depleting substances are already falling. Assuming continued compliance, stratospheric chlorine levels will peak in a few years and then slowly return to normal. The good news is that the natural ozone production process will heal the ozone layer in about 50 years.

Q & A on Ozone Depletion

  1. What is the ozone layer and why is it important?
    The ozone layer is a concentration of ozone molecules in the stratosphere. About 90% of the planet's ozone is in the ozone layer. The layer of the Earth's atmosphere that surrounds us is called the troposphere. The stratosphere, the next higher layer, extends about 10-50 kilometers above the Earth's surface. Stratospheric ozone is a naturally-occurring gas that filters the sun's ultraviolet (UV) radiation. A diminished ozone layer allows more radiation to reach the Earth's surface. For people, overexposure to UV rays can lead to skin cancer, cataracts, and weakened immune systems. Increased UV can also lead to reduced crop yield and disruptions in the marine food chain. UV also has other harmful effects.
  2. How does ozone depletion occur?
    It is caused by the release of chlorofluorocarbons (CFC's) and other ozone-depleting substances (ODS), which were used widely as refrigerants, insulating foams, and solvents. The discussion below focuses on CFCs, but is relevant to all ODS. Although CFCs are heavier than air, they are eventually carried into the stratosphere in a process that can take as long as 2 to 5 years. Measurements of CFCs in the stratosphere are made from balloons, aircraft, and satellites.

    When CFCs reach the stratosphere, the ultraviolet radiation from the sun causes them to break apart and release chlorine atoms which react with ozone, starting chemical cycles of ozone destruction that deplete the ozone layer. One chlorine atom can break apart more than 100,000 ozone molecules.

    Other chemicals that damage the ozone layer include methyl bromide (used as a pesticide), halons (used in fire extinguishers), and methyl chloroform (used as a solvent in industrial processes). As methyl bromide and halons are broken apart, they release bromine atoms, which are 40 times more destructive to ozone molecules than chlorine atoms.

  3. How do we know that natural sources are not responsible for ozone depletion?
    While it is true that volcanoes and oceans release large amounts of chlorine, the chlorine from these sources is easily dissolved in water and washes out of the atmosphere in rain. In contrast, CFCs are not broken down in the lower atmosphere and do not dissolve in water. The chlorine in these human-made molecules does reach the stratosphere. Measurements show that the increase in stratospheric chlorine since 1985 matches the amount released from CFCs and other ozone-depleting substances produced and released by human activities.

  4. What is being done about ozone depletion?
    In 1978, the use of CFC propellants in spray cans was banned in the U.S. In the 1980s, the Antarctic "ozone hole" appeared and an international science assessment more strongly linked the release of CFCs and ozone depletion. It became evident that a stronger world wide response was needed. In 1987, the Montreal Protocol was signed and the signatory nations committed themselves to a reduction in the use of CFCs and other ozone-depleting substances.

    Since that time, the treaty has been amended to ban CFC production after 1995 in the developed countries, and later in developing. Today, over 160 countries have signed the treaty. Beginning January 1, 1996, only recycled and stockpiled CFCs will be available for use in developed countries like the US. This production phaseout is possible because of efforts to ensure that there will be substitute chemicals and technologies for all CFC uses.

    EPA coordinates numerous regulatory programs designed to help the ozone layer and continues to be active in developing international ozone protection policies. Individuals can also help, primarily by ensuring that technicians working on air conditioning and refrigeration equipment are certified by EPA, that refrigerants are recaptured and not released, and by educating themselves about the issue of ozone depletion.

  5. Is there general agreement among scientists on the science of ozone depletion?
    Yes. Under the sponsorship of the UN Environment Programme (UNEP) and the World Meteorological Organization (WMO), the scientific community issues periodic reports. Almost 300 scientists worldwide drafted and reviewed the WMO/UNEP Scientific Assessment of Ozone Depletion: 1994 ( can be obtained from EPA's Stratospheric Ozone Protection hotline at 800-296-1996). An international consensus about the causes and effects of ozone depletion has emerged.

  6. Will the ozone layer recover? Can we make more ozone to fill in the hole?
    The answers, in order, are: yes and no. We can't make enough ozone to replace what's been destroyed, but provided that we stop producing ozone-depleting substances, natural ozone production reactions should return the ozone layer to normal levels by about 2050. It is very important that the world comply with the Montreal Protocol; delays in ending production could result in additional damage and prolong the ozone layer's recovery.

Heat Pump and Central Air Conditioning Definitions

Air Conditioner: Assembly of equipment for the simultaneous control of air temperature, relative humidity, purity, and motion.

Air Cooled: Uses a fan to discharge heat from the condenser coil to the outdoors.

Air-Source: Air is being used as the heat source or heat sink for a heat pump.

BTU: British Thermal Unit. The amount of energy needed to change the temperature of one pound of water by one degree Fahrenheit. In practical terms, it represents a unit of measure of heat extracted from your home for cooling.

Central Air Conditioner System: System in which air is treated at a central location and carried to and from the rooms by one or more fans and a system of ducts.

Compressor: The pump that moves the refrigerant from the indoor evaporator to the outdoor condenser and back to the evaporator again. The compressor is often called "the heart of the system" because it circulates the refrigerant through the loop.

Condenser Coil: A series or network of tubes filled with refrigerant, normally located outside the home, that removes heat from the hot, gaseous refrigerant so that the refrigerant becomes liquid again.

Cooling Capacity: A measure of the ability of a unit to remove heat from an enclosed space.

COP: Coefficient of Performance of a heat pump means the ratio of the rate of useful heat output delivered by the complete heat pump unit (exclusive of supplementary heating) to the corresponding rate of energy input, in consistent units and under operating conditions.

EER: Energy Efficiency Ratio means the ratio of the cooling capacity of the air conditioner in British Thermal Units per hour, to the total electrical input in watts under ARI-specified test conditions.

Evaporator Coil: A series or network of tubes filled with refrigerant located inside the home that take heat and moisture out of indoor air as liquid refrigerant evaporates.

Free Delivery: There are no ducts and the unit may be installed in the field without ducts if needed.

Ground-Source: The ground or soil below the frost line is being used as the heat source or heat sink for a heat pump.

Ground Water-Source: Water from an underground well is being used as the heat source or heat sink for a heat pump.

Heat Pump: An air conditioner capable of heating by refrigeration. It may or may not include a capability for cooling. Outside air or water is used as a heat source or heat sink, depending upon whether the system is heating or cooling.

Heating Capacity: A measure of the ability of a unit to add heat to an enclosed space.

HSPF: Heating Seasonal Performance Factor means the total heating output of a heat pump in British Thermal Units during its normal usage period for heating divided by the total electrical energy input in watt-hours during the same period.

SEER: Seasonal Energy Efficiency Ratio means the total cooling output of a central air conditioner in British thermal units during its normal usage period for cooling divided by the total electrical energy input in watt-hours during the same period as determined using the ARI-specified test procedure. This rating is only for units with cooling capacity less than 65,000 Btu/hr. The higher the SEER, the more efficient the unit. The more efficient the unit, the lower the operating cost.

Single Package: A central air conditioner which combines both condenser and air handling capabilities in a single packaged unit.

Split System: A central air conditioner consisting of two or more major components. The system usually consists of a compressor-containing unit and condenser, installed outside the building and a non-compressor -containing air handling unit installed within the building. This is the most common type of system installed in a home.

Ton: The unit of measurement for air conditioning system capacity. One ton of air conditioning removes 12,000 Btu's of heat energy per hour from a home. Central air conditioners are sized in tons. Residential units usually range from 1 to 5 tons.

Water-Source: Water is being used as the heat source or heat sink for a heat pump. Sources of underground water are wells and sources of surface water are lakes, large ponds, and rivers.

Year-Round: Air Conditioner which uses gas or oil for heating.

Click House to Go to Heat Pump Demo


Once you are at the site, hit "start my air conditioner" again. Patience. This takes a few minutes to load.

If it does not load, you may need to disable your browsers' Ad-blocker.

*requires Adobe Flash Player,
click here to install